Shenzhen Chuangying Times Technology Co., Ltd.
Shenzhen Chuangying Times Technology Co., Ltd.
Add to Cart
| Power supply | AC 220V ±10% 50Hz 16A. |
| Dimensions | 2300MM × 4900MM × 2200MM. |
| The quality of the whole machine | (approximately) 1000Kg. |
| Weight | 1000kg |
| Expansion performance | can be connected to packaging equipment. |
| Use environment | ambient temperature 10-30 degrees Celsius, relative humidity less than 80%, no condensation, no dust, no corrosive gas, no strong vibration source around the machine. |
The country is currently at a critical time in the fight against the new crown pneumonia epidemic, and flat masks have undoubtedly become the most practical and important line of defense in this campaign. Whether it is front-line medical staff, ordinary householders or office workers in all walks of life, they all need this "armor" shelter;
China is the world's largest producer of masks, with a daily production capacity of more than 20 million flat masks. But when a product becomes a daily necessities for 1.4 billion people, the almost impossible to quantify demand figures make the original production capacity drop in the bucket.
As a professional manufacturer of automation equipment, Chuangying is based on its own professional field and technical advantages, and has the courage to take responsibility, actively innovate and develop and design flat mask machines and automatic production equipment to make its own contribution to the fight against the epidemic.
Machine features of automatic strapping flat mask machine
1. The frame is made of aluminum alloy and stainless steel, and the appearance is light and beautiful without rust.
2. Automatic counting, which can effectively control production efficiency and production progress.
3. Frequency conversion control can adjust the operating speed of the equipment according to actual needs.
4. Pull the barrel to feed the material, the positioning is more accurate, the width of the raw material can be controlled to the minimum, and the cost is saved.
5. The length and size of the finished product are uniformly controlled, with a deviation of ±1mm, which can effectively control the length of the finished product.
6. The equipment has a high degree of automation and low requirements on the operating staff. It only needs to discharge the materials and arrange the finished products.
7. Stable performance and easy operation.
8. The automatic ultrasonic welding wheel is made of imported high-quality steel, with long mold life, wear-resistant and durable.
Precautions for machine installation of automatic strapping flat mask machine
1. Unpack the package and check the surface and parts of the equipment for signs of damage. Check whether the screws are loose, whether the electrical connectors are locked, and whether the accessories are complete.
2. The flat face mask machine equipment should be placed on a flat hard ground. The mask strapping machine is required to be at least 0.5 meters away from the heat source, and it is necessary to ensure that there is at least 1 meter in the front and rear of the mask strapping machine and at least 1 meter in the left and right sides for easy operation.
3. Check the voltage requirements of the sign on the back of the vibrating box, and ensure that the system is well grounded.
4. Connect the device to the power supply, and make sure to turn off the power switch first.
The voltage requirement of this machine: AC220V, 50~60Hz
