Shenzhen Chuangying Times Technology Co., Ltd.
Shenzhen Chuangying Times Technology Co., Ltd.
Add to Cart
| Power supply | AC 220V ±10% 50Hz 16A. |
| Dimensions | 2300MM × 4900MM × 2200MM. |
| The quality of the whole machine | (approximately) 1000Kg. |
| Key Selling Points | Nonwoven Fabric Proction Line |
| Expansion performance | can be connected to packaging equipment. |
| Use environment | ambient temperature 10-30 degrees Celsius, relative humidity less than 80%, no condensation, no dust, no corrosive gas, no strong vibration source around the machine. |
Q: How long is the delivery time?
Answer: The general situation is 3-5 days for delivery. If you need a customized mask shape, it will take 7-10 days. Please refer to customer service for details.
Question: The machine I want is too inconsistent with what you showed on the Internet. Can I do it?
Answer: Yes, you need to provide machine pictures and finished mask pictures.
Question: What should I do if I buy a machine and I won’t install it back?
Answer: South Korea and Vietnam have after-sales and can be installed on site. Other countries can send installation videos and remote video guidance. Many foreign customers install this way. You only need to install the four screws of the connector of the filming machine and the earband machine, learn to load the cloth and operate normally. The company will be equipped with text version and video version of the whole teaching.
Q: How long is the warranty period?
Answer: The warranty period is one year. The ultrasound is three months. During the warranty period, the parts are damaged and the company provides new parts.
The following information comes from the Internet for reference only
Flat mask machine: The machine that produces masks. The mask machines currently on the market include: HD-0301 flat mask machine, HD-0304 cup mask machine, duckbill mask machine, folding mask machine, gauze mask machine, etc.
The flat mask machine series can be divided into: inner ear mask machine, outer ear mask machine, strap mask machine according to the welding method and use method of the ear belt. The production of these three flat masks requires the mask body machine. It is An indispensable part of a flat mask.
The entire production process of flat masks is still relatively large, especially the subsequent disinfection process. This is why a mask is made in 0.5 seconds, and the production efficiency is still in short supply. To understand the production process of masks, start with the structure of the mask itself. From the beginning, when we cut a medical mask, we can find that the mask has three layers of non-woven fabric, which is also required by the national standard for medical masks, otherwise it will not meet the protection requirements.
Medical flat masks are generally referred to as SMS structure
To make masks, all the raw material fibers are polypropylene (PP), and medical masks are generally referred to as SMS structures. Among them, the spunbond layer is a single layer, and the meltblown layer can be divided into single layer or multiple layers according to filtration requirements. "Meltblown cloth", commonly known as the "heart" of masks, is the filter layer in the middle of the mask. It has good filtering, shielding, heat insulation and oil absorption properties, and is an important raw material for the production of masks.
The special polypropylene high-melt index non-woven fabric has become the best choice for masks. It can also be used in many medical supplies such as disposable surgical gowns, sheets, drapes, and liquid absorbent pads. These materials come from some chemical companies such as Sinopec, Qilu Petrochemical, Zhenhai Refining and Chemical, Maoming Petrochemical.
With the supply of raw materials, the process of making masks is less complicated
