Shenzhen Chuangying Times Technology Co., Ltd.
Shenzhen Chuangying Times Technology Co., Ltd.
Add to Cart
cup paper printer machine paper cup machinery paper coffee cup making machine
Machine model: high-speed simple paper cup machine
Backside Soldering : Copper Heater Ultrasonic Heater
Raw material : single side PE coated paper (popular hot drink cup) single/double PE coated paper (popular hot drink cup and cold drink cup)
Total weight : Gw /NW:1750 kgs/1650 KgS.
Working air source (ultrasonic): Air pressure 0.4MPa a. machine.
Cup bottom heating: heater knurling (single-sided PE paper is heated and knurled; double-sided PE paper is knurled with cooling device circular water.)
Bottom knurling: heat knurling (if using single layer PE coated paper)
Electric System:
High-quality brand electrical systems, such as Delta, Schneider.
The PLC control system adopts the Delta brand, which is made in Taiwan and is reliable.
quality.
Servo Motor:
The bttom paper feeding is controlled by servo motor and stepping motor,which greatly improve paper feeding in high precision and
high efiency way.(more stable ,less troubles and save bottom paper)
| Paper size : | 2~16 oz (replaceable die, max cup height 136mm, max bottom width 76mm.) |
| Rated speed: | 70-80 per minute (the speed is affected by the size of the paper cup, paper quality and thickness), the running speed is stable, 75 per minute |
| Paper material: | 140-250 GSM.140~350gsm. |
| Power requirements: | 50/60 Hz.380V/220V (preferably use 380V, 3Phase) or special power requirements |
| Total power : | 6.5 kw, 7.5 kw. |
| Total weight : | Gw /NW:1750 kgs/1650 Kgs. |
Excerpted from the Internet, for reference only
Machine introduction
The ultrasonic inner ear strap mask machine adopts ultrasonic welding method. When the mask is moved to the processing position, the ultrasonic wave is automatically generated, which forms micro-amplitude and high-frequency vibration on the ear strap, which is instantly converted into heat, melts the material to be processed, and finally makes the ear straps. The tape is permanently pasted or embedded in the inner side of the mask body. It is the last processing process of the inner ear mask production. Only one operator needs to place the mask body piece by piece in the mask tray, and the equipment will automatically operate the subsequent actions until the finished product is completed. .
Machine parameters
Machine size: 1915(L)*855(W)*1780(H)mm
Voltage: 220V, 1or 3 phase
Capacity: 40-50pcs/min
Power consumption: 6KW
Air pressure: 6kg/cm2
Frequency: 20KHZ