
Add to Cart
paper-cup-and-plate-making-machine machine-for-the-manufacture-of-paper-cups paper cup used machine
Machine model: high-speed simple paper cup machine
Backside Soldering : Copper Heater Ultrasonic Heater
Raw material : single side PE coated paper (popular hot drink cup) single/double PE coated paper (popular hot drink cup and cold drink cup)
Total weight : Gw /NW:1750 kgs/1650 KgS.
Working air source (ultrasonic): Air pressure 0.4MPa a. machine.
Cup bottom heating: heater knurling (single-sided PE paper is heated and knurled; double-sided PE paper is knurled with cooling device circular water.)
Bottom knurling: heat knurling (if using single layer PE coated paper)
Electric System:
High-quality brand electrical systems, such as Delta, Schneider.
The PLC control system adopts the Delta brand, which is made in Taiwan and is reliable.
quality.
Servo Motor:
The bttom paper feeding is controlled by servo motor and stepping motor,which greatly improve paper feeding in high precision and
high efiency way.(more stable ,less troubles and save bottom paper)
Paper size : | 2~16 oz (replaceable die, max cup height 136mm, max bottom width 76mm.) |
Rated speed: | 70-80 per minute (the speed is affected by the size of the paper cup, paper quality and thickness), the running speed is stable, 75 per minute |
Paper material: | 140-250 GSM.140~350gsm. |
Power requirements: | 50/60 Hz.380V/220V (preferably use 380V, 3Phase) or special power requirements |
Total power : | 6.5 kw, 7.5 kw. |
Total weight : | Gw /NW:1750 kgs/1650 Kgs. |
Excerpted from the Internet, for reference only
Carefully observe the paper cups
❶: Observe whether the inner and outer surfaces of the paper cup are clean, whether there is deformation, mildew, and whether the thickness is uniform. Good quality paper cups have good resilience and will not be soft when you pinch them.
❷: Pay attention to the principle of 15 and 10 for cold and hot paper cups. Because the graphite on the patterned disposable paper cups is easy to fall off, it is not friendly to health. The mouth of the cup is easy to touch the lips, and the bottom of the cup is worried about penetration. Therefore, there should be no printing within 15mm of the cup mouth from the cup body and 10mm of the cup bottom from the cup body, which must be up to the standard of regular manufacturers.
❸: Smell it, if there is a pungent ink smell or other pungent smell, don't use it.